37
D-Link DCS-2630L User Manual
Section 3 - Configuration
Snapshot
The snapshot feature lets you send image snapshots via FTP or e-mail when a trigger is activated. You can send snapshots to both an FTP server
and an e-mail address.
Snapshot:
Trigger By:
Snapshot Type:
Target:
Check this box to enable the Snapshot function.
Select whether to record a snapshot when triggered by
Motion
or
Sound
,
according to a
Schedule
, or
Always
record.
• Motion
: Enables recording when motion is detected. You can limit
motion-triggered recording to a specific schedule by selection
Only
during
and entering the times you want motion-triggered recording
to be enabled.
• Schedule
: Enables recording according to a schedule. Enter the times
you want the camera to record. During these times, a snapshot will be
taken every second.
• Always
: This will enable continuous recording. A snapshot will be
taken every second.
• Sound
: Enables recording when sound is detected. You can limit
sound-triggered recording to a specific schedule by selection
Only
during
and entering the times you want sound-triggered recording
to be enabled.
Select whether to take a single snapshot or to take 6 snapshots with a
selectable interval between them. Snapshots will always use Video Profile
2. For more on video profile options, refer to
Audio and Video
on page 33.
Select where you want the snapshot to be sent. It may be uploaded to
an FTP server or sent to an e-mail address. Enter the settings for your FTP
server or e-mail account.
Click
Save Settings
to save your changes.