52
D-Link DCS-2332L User Manual
Section 4: Configuration
Wireless Setup
This section allows you to set up and configure the wireless settings on your camera. After making any changes, click the
Save Settings
button to
save your changes.
Site Survey:
SSID:
Wireless Mode:
Channel:
Authentication:
Encryption:
Default Key:
Click the
Rescan
button to scan for available wireless
networks. After scanning, you can use the drop-down
box to select an available wireless network. The related
information (SSID, Wireless Mode, Channel, Authentication,
Encryption) will be automatically filled in for you.
Enter the SSID of the wireless access point you wish to
use.
Use the drop-down box to select the mode of the
wireless network you wish to connect to.
Infrastructure
is normally used to connect to an access point or router.
Ad-Hoc
is usually used to connect directly to another
computer.
If you are using
Ad-Hoc
mode, select the channel of the
wireless network you wish to connect to or select
Auto
.
Select the authentication you use on your wireless
network:
Open
,
Shared
,
WPA-PSK
or
WPA2-PSK
.
If you use
WPA-PSK
or
WPA2-PSK
authentication, you
will need to specify whether your wireless network
uses
TKIP
or
AES
encryption. If you use
Open
or
Shared
authentication,
WEP
encryption should be the setting.
If you use
WEP
,
WPA-PSK
or
WPA2-PSK
authentication,
enter the Key (or password) used for your wireless
network.
DCS-2332L