15
D-Link DCS-2332L User Manual
Section 1: Product Overview
Removing the Bottom Panel
Step 1:
Place the camera face down on a non-slip flat surface.
Step 2:
Carefully pry out the two protective rubber screw coverings using a thin flat blade.
Step 3:
Undo the two screws using a Phillips Screwdriver.
Step 4:
Lift off the protective panel.
Using the Reset Button
Step 1:
Follow the steps outlined above in
Step 2:
Using a paperclip or similar tool, press and hold the
Reset Button
for 10 seconds. This will
reset the device to it's factory settings.
Step 3:
Follow the steps outlined in
2
2
3
4