![background image](http://html.mh-extra.com/html/d-link/dcs-2103/dcs-2103_user-manual_77580030.webp)
30
D-Link DCS-2130 User Manual
Configuration
Motion Detection
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used
for monitoring. After making any changes, click the
Save Settings
button to save your changes.
Enable Video Motion:
Sensitivity:
Percentage:
Draw Motion Area:
Erase Motion Area:
Select this box to enable the motion detection
feature of your camera.
Specifies the measurable difference between two
sequential images that would indicate motion. Please
enter a value between 0 and 100.
Specifies the amount of motion in the window being
monitored that is required to initiate an alert. If this
is set to 100%, motion is detected within the whole
window will trigger a snapshot.
Draw the motion detection area by dragging your
mouse in the window (indicated by the red square).
To erase a motion detection area, simply click on the
red square that you wish to remove.
Right clicking on the camera image brings up the
following menu options:
Select All:
Draws a motion detection area over
the entire screen.
Clear All:
Clears any motion detection areas that
have been drawn.
Restore:
Restores the previously specified motion
detection areas.
Summary of Contents for DCS-2103
Page 1: ......
Page 54: ...54 D Link DCS 2130 User Manual Appendix Dimensions ...