![background image](http://html2.mh-extra.com/html/d-link/dcs-1130-mydlink-enabled-wireless-n-network/dcs-1130-mydlink-enabled-wireless-n-network_user-manual_3116484035.webp)
31
D-Link DCS-1130 User Manual
Section 3 - Configuration
Maintenance > System
This screen allows you to save and restore the camera’s current
configuration. You can also reset all settings to factory default or reboot
the device.
Save To Local Hard Drive
: Click on the
Save Configuration
button to
save the current configuration to a hard drive.
Load From Local Hard Drive
: To load a saved configuration, click on the
Browse
button to select a configuration file from your hard drive. Then,
click the
Load Configuration
button to load the new configuration.
Restore To Factory Defaults
: Click this button to reset all settings to
their factory defaults. If you choose to reset your settings, you will need
to set up your camera again.
Reboot Device
: Clicking the
Reboot
button will reboot your device.
Summary of Contents for DCS-1130 - mydlink-enabled Wireless N Network...
Page 1: ......