![background image](http://html2.mh-extra.com/html/d-link/dcs-1100/dcs-1100_user-manual_3115788026.webp)
21
D-Link DCS-1100/1130 User Manual
Section 4 - Configuration
Enable UPnP:
Universal Plug & Play (UPnP) allows Windows PCs to
find this camera under “Network Neighborhood” without configuration.
Enable PPPoE:
If you are using a PPPoE connection, enable it and enter
the
User Name
and
Password
for your PPPoE account. You can get
this information from your Internet service provider (ISP).
HTTP Port:
This is the port that allows the user to connect to the camera’s
user interface. By default the port is set to 80. You may change the port
number if using multiple cameras.
RTSP Port:
This is the port that you use for RTSP streaming to mobile
devices or PDAs. By default the port is set to 554. You may change the
port number if using multiple cameras.
Note:
You MUST also set up your router/gateway for Port Forwarding/
Mapping; this will enable remote viewing of your camera via
the Internet. Please refer to your router’s instruction manual on how to open up ports. For additional
help on configuring your camera to work with your router, please refer to
Appendix A:
Installing the
DCS-1100/1130 on a Router Without UPnP
on page 45. For installing multiple cameras, ONE port per camera must
be opened on your router, the Web server (HTTP) port. Also, some browsers may restrict some ports, such as 1 or
22, for security purposes. If you have problems accessing your camera through HTTP, try using a port higher than
1024.
After making any changes, click the
Save Settings
button to save your changes, or click the
Don’t Save Settings
button to discard your changes.
Summary of Contents for DCS-1100
Page 1: ......