3
D-Link DCH-S161 User Manual
Section 1 - Product Overview
Hardware Overview
1
Water Sensor Probe
Place this in the location where you would like the sensor to detect water.
2
Action Button / LED
Press this button to complete WPS pairing. Press to turn off siren. Press to wake up device from sleep
mode. See
LED Behavior
on
page 4
.
3
Reset Button
Press this recessed button down quickly with a paperclip to reset the device to factory default settings.
The LED will flash
red
once.
4
Siren
Speaker for the 90 decibel siren.
5
Battery Compartment
Where 2 AA batteries must be placed to power the device.
6
Mounting Holes
The 2 holes where appropriately-sized screws can be placed in order to mount the device.
7
Battery Cover Release Tab
Press down from the top and pull out the battery cover from here.
8
Water-Sensing Probe Port
Where to plug in the cable for the water-sensing probe.
Front
Back
Action Button/LED
Siren
Reset Button
Water Sensor Probe
Battery
Compartment
Mounting Holes
Bottom
Water-Sensing Probe Port
1
2
3
4
8
Battery Cover
Release Tab
5
6
7