D-Link DAP-3320, Quick Installation Manual

Page: 6 / 32

D-Link DAP-3320 Quick Install Guide
4
Physical Installation
Remove the bottom cover
Lift the release tab in the middle of the
cover, then pull the cover off.
Connect an Ethernet cable
Connect an Ethernet cable(not included) to
the Ethernet port.
Connect the grounding wire
Use the grounding screw to attach the
grounding wire.
Quick Installation Guide
This installation guide provides basic
instructions for installing the DAP-3320
Wireless PoE Outdoor Access Point on your
network. For additional information about
how to use the Access Point, please see
the datasheet and user manual available on
the D-Link support website.
Minimum System Requirements
- Computer with Windows, Mac OS, or
Linux-based operating system, and an
Ethernet adapter installed
- Internet Explorer 7, Mozilla Firefox 12.0,
Safari 4.0, or Chrome 20.0 or newer
Package Contents
- DAP-3320 802.11n Power over Ethernet (PoE)
Access Point
- CD-ROM
- Wall mounting bracket with mounting kit
- Two plastic mounting ties
- Grounding wire
If any of the above items are missing,
please contact your reseller.
NOTE no PSU supplied. To power the units use
an D-Link PoE switch or the D-Link DPE-101GI
PoE injector.
E
N
G
LI
S
H