manualshive.com logo in svg

D-Link DAP-3315, User Manual

Share
Download
D-Link DAP-3315 User Manual Download Page 28

28

D-Link DAP-3315 User Manual

Section 3 - Configuration

Wireless Band: 

Connection Limit: 

User Limit: 

Aging out: 

RSSI Threshold: 

2.4GHz(DAP-3315 is 2.4GHz Access Point

Select Enable or Disable. This is an option for 

load balancing. This determines whether to 

limit the number of users accessing this device. 

The exact number is entered in the User Limit 

field below. This feature allows the user to share 

the wireless network traffic and the client using 

multiple APs. If this function is enabled and 

when the number of users exceeds this value, 

or the network utilization of this AP exceeds 

the percentage that has been specified, the 

DAP-3315 will not allow clients to associate 

with the AP.

Set the maximum amount of users that are 

allowed access (zero to 64 users) to the device 

using the specified wireless band. The default 

setting is 20.

Use the drop-down menu to select the criteria 

of disconnecting the wireless clients. Available 

options are RSSI and Data Rate.

When RSSI is selected in the Aging out drop-

down menu, select the percentage of RSSI 

here. When the RSSI of wireless clients is lower 

than the specified percentage, the device 

disconnects the wireless clients.

Wireless Resource

Summary of Contents for DAP-3315




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands