manualshive.com logo in svg

D-Link DAP-3315, User Manual

Share
Download
D-Link DAP-3315 User Manual Download Page 25

25

D-Link DAP-3315 User Manual

Section 3 - Configuration

Advanced Settings 

Performance

Wireless:

Wireless Mode:

Data Rate:

Beacon 

Interval:

Use the drop-down menu to turn the wireless 

function 

On

 or 

Off

.

The different combination of clients that can be 

supported include 

Mixed 802.11n

, 

802.11g 

and

 

802.11b

, 

Mixed 802.11g and 802.11b 

and 

802.11n Only

. 

Note

: When backwards compatibility is enabled 

for legacy (802.11g/b) clients, degradation of 

802.11n wireless performance is expected.

Set the base transfer rate of wireless adapters 

on the wireless LAN. The AP will adjust the base 

transfer rate depending on the base rate of 

the connected device. This option is enabled 

in 

Mixed 802.11g and 802.11b

 mode. The 

choices available are 

Best (Up to 54)

, 

54

, 

48

, 

36

, 

24

, 

18

, 

12

, 

9

, 

6

, 

11

, 

5.5

, 

2

 or 

1

.

Beacons are packets sent by an access point 

to synchronize a wireless network. Specify 

a value in milliseconds. The default (

100

) 

is recommended. Setting a higher beacon 

interval can help to save the power of wireless 

clients, while setting a lower one can help a 

wireless client connect to an access point faster. 

This options on this page will allow you to fine tune the wireless 

connectivity of the access point.

Summary of Contents for DAP-3315




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands