802.11 b/g Access Point Command Line Interface Manual
9
5
W
IRELESS
C
OMMANDS
Fundamental
Config Commands:
Function
Syntax
config wlan
Select WLAN Adapter to configure. DWL-3220AP only WLAN 1 is
available for configuration. This command is not necessary.
config wlan [0:1]
Find Commands:
find bss
Perform Site Survey, Wireless service will be disrupted
find bss
find channel
Channel spanning to select the Preferred Channel
find channel
find all
Perform Site Survey including Super G and Turbo, Wireless service will
be disrupted
find all
IGMP Command:
Function
Syntax
igmp state
Display IGMP snooping state
igmp state
igmp enable
Enable IGMP snooping
igmp enable
igmp disable
Disable IGMP snooping
igmp disable
igmp dump
Display IGMP MDB dump list
igmp dump
igmp getrssi
Display IGMP snooping rssi threshold
igmp getrssi
igmp setrssi
Set IGMP snooping rssi threshold
igmp setrssi <0 -
+
>
igmp getportagingtime
Display IGMP snooping port aging time
igmp getportagingtime
igmp setportagingtime
Set IGMP snooping port aging time
igmp setportagingtime <0 -
+
>
Get Command:
Function
Syntax
get apmode
Display current AP Mode
get apmode
get ssid
Display Service Set ID
get ssid
get ssidsuppress
Display SSID Suppress Mode as enabled or disabled
get ssidsuppress
get station
Display Client Station Connection Status
get station
get wdsap
Display WDS Access Point List
get wdsap
get remoteAp
Display Remote AP's Mac Address
get remoteAp
get association
Display Association Table that indicates the information of associated
client devices
get association
get autochannelselect
Display state of Auto Channel Selection feature (enabled, disabled)
get autochannelselect
get frequency
Display Radio Frequency (MHz)
get frequency
get channel
Display Radio Frequency (MHz) and Channel Designation
get channel