D-Link DAP-2230 User Manual Download Page 9

Page: 9 / 139

D-Link DAP-2230 User Manual

Section 1 - Product Overview

• Faster Wireless Networking -

The DAP-2230 provides an up to 300 Mbps* wireless connection with other 802.11n

wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online

gaming, and real-time audio.

• Compatible with IEEE802.11g Devices -

The DAP-2230 is still fully compatible with the 802.11g standards, so it can

connect with existing 802.11g adapters.

• Four different operation modes -

Capable of operating in one of four different operation modes to meet your wireless

networking needs: Access Point, WDS with AP, WDS, and Wireless Client.

• Power over Ethernet -

The DAP-2230 supports IEEE 802.3af PoE (Power over Ethernet) which enables it to be supplied

with power over an Ethernet cable or IEEE 802.3af PoE switch.

• Comprehensive Web-Interface -

Fine tune network settings using the DAP-2230’s robust network-based configuration

software.

• Central WiFiManager management software compatibility -

The real-time display of the network’s topology and

AP’s information makes network configuration and management of multiple devices quick and simple.

• SNMP for management -

The DAP-2230 supports SNMP v1, v2c, and v3 for better network management. Superior

wireless AP manager software is bundled with the DAP-2230 for network configuration and firmware upgrade.

Systems administrators can also set up the DAP-2230 easily with the Web-based configuration utility.

• Convenient Installation -

The DAP-2230 features a wall mount in the rear for easy setup on walls.

Features

Summary of Contents for DAP-2230












































































































































Search results

Summary of Contents for DAP-2230

Reviews:

Related manuals for DAP-2230

Brands by name

Popular brands

D-Link DAP-2230, User Manual

Search results

Summary of Contents for DAP-2230

Reviews:

Related manuals for DAP-2230

Brands by name

Popular brands