D-Link DAP-2230 User Manual Download Page 51

Page: 51 / 139

D-Link DAP-2230 User Manual

Section 3 - Configuration

Configuration Settings

In the AP array configuration settings windows, users can specify which settings all the APs in the group will inherit from the

master AP. Make the desired selections in this window and click the

Save

button to accept the changes.

Enable AP

Array

Configuration:

Select to Enable or Disable the AP array configure feature here.

Wireless

Basic

Settings:

Select this option to specify the basic wireless settings that the APs in the

group will inherit.

Wireless

Advanced

Settings:

Select this option to specify the advanced wireless settings that the APs in

the group will inherit.

Multiple

SSID &

VLAN:

Select this option to specify the multiple SSIDs and VLAN settings that the

APs in the group will inherit.

Advanced

Functions:

Select this option to specify the other advanced settings that the APs in the

group will inherit.

Administration

Settings:

Select this option to specify the administrative settings that the APs in the

group will inherit.

Summary of Contents for DAP-2230












































































































































Search results

Summary of Contents for DAP-2230

Reviews:

Related manuals for DAP-2230

Brands by name

Popular brands

D-Link DAP-2230, User Manual

Search results

Summary of Contents for DAP-2230

Reviews:

Related manuals for DAP-2230

Brands by name

Popular brands