DAP-1665 Install Guide
17
8
If the
Wi-Fi Network
you selected is secure, you will need to enter the Wi-Fi
Password
and click
Next
to connect.
Connect Your Wireless Devices
to the DAP-1665*
From your wireless device, go to the Wireless Utility to display the available
wireless networks and select the Wi-Fi Network Name (SSID) that you created
for the DAP-1665. The default Wi-Fi network name and password are located
on the configuration card.
Wi-Fi Name(SSID) 2.4Ghz:
dlink-xxxx
Wi-Fi Name(SSID) 5GHz:
dlink-xxxx-5GHz
Password: xxxxxxxx
To configure your router, go to:
http://dlinkrouter.local.
Or http://192.168.0.1
Username: “Admin”
Password:” “ (leave the field blank)
Your device is now connected to the DAP-1665 and can connect to your
wireless router. If you want to change your network settings, password, etc.,
follow the steps on page 14 to
Configure Using a Web Browser
. To connect
additional devices, repeat
step 1
.
Your setup is complete!
1
2
Note:
The DAP-1665 must be set up as a Repeater or Access Point.
