39
D-Link DAP-1650 User Manual
Section 3 - Configuration
Network Settings
The Network Settings page enables you to configure the Local Area Network (LAN) settings for the access point. From this
page you can adjust your local network’s IP address settings, and configure IPv6.
Device Name:
LAN IPv4
Connection Type:
IP Address:
Subnet Mask:
Gateway Address:
Primary DNS
Server:
Secondary DNS
Server:
You can change the name of your access point to make it
easier to identify. Enter a name for the access point in the field
provided. If you change the device name, you should use this
name in your web browser address bar when trying to access
the web-based configuration utility.
Example
: http://devicename
Select how you would like to configure the access point’s IP
address settings from the drop-down menu:
Dynamic IP(DHCP)
- The access point will request an IP address
from the DHCP server that it is connected to.
Static IP
- You can manually specify the IP address settings for
the access point.
Enter the IP address that you want to specify for the access
point (Static IP only).
Enter the subnet mask to be used by the access point (Static
IP only).
Enter the default gateway address to be used by the access
point (Static IP only).
Enter the primary DNS server address to be used by the access
point (Static IP only).
Enter the secondary DNS server address to be used by the access
point (Static IP only).
Click
Save Settings
at the bottom of the page to save the
current configuration.
