D-Link DAP-1650 User Manual Download Page 15

Page: 15 / 100

D-Link DAP-1650 User Manual

Section 3 - Configuration

2. Use your iOS or Android mobile device to scan the QR code

to the right to download the

SharePort Mobile

app.

You can also search for the SharePort Mobile app directly in

the iOS App Store or Google Play.

SharePort Mobile App (iOS, Android)

3. From your iOS or Android mobile device, choose

Settings.

Note:

These steps are for the iOS version of the

app. The Android version may differ slightly.

Settings

iOS

Android

USB port

1. Plug your USB storage drive into the USB port.

Note:

The DAP-1650 supports hard drives with up to

one terabyte of storage capacity.

The SharePort Mobile app will allow you to access files from a USB storage drive that is plugged into your router. You must enable file sharing from

the

Setup

Storage

page (refer to page 22) for this app to work properly.

Configuration

Summary of Contents for DAP-1650





































































































Search results

Summary of Contents for DAP-1650

Reviews:

Brands by name

Popular brands

D-Link DAP-1650, User Manual

Search results

Summary of Contents for DAP-1650

Reviews:

Brands by name

Popular brands