46
D-Link DAP-1620 User Manual
Section 4 - Connecting a Wireless Client
Connecting Wireless Clients to the Extended
Network
WPS Button
Once an uplink network has been established, you may use the DAP-1620’s WPS function to add additional wireless clients to your
extended network. Many wireless devices such as wireless routers, media players, printers, and cameras will have a WPS button (or a
software utility with WPS) that you can press to connect to the DAP-1620. Please refer to the user manual for the wireless device you
want to connect to make sure you understand how to enable WPS. Once you are certain, follow the steps below:
Step 1
- Press the WPS button on the DAP-1620 for about 1 second. The LED on the device will start to blink.
Step 2
- Within 120 seconds, press the WPS button on your wireless device.
Step 3
- Allow up to 1 minute to configure. Once the LED light stops blinking and turns solid green, you will be connected and your
wireless connection will be secured with WPA2.
