38
D-Link DAP-1620 User Manual
Section 3 - Configuration
Network Settings
This page lets you configure the network settings for the DAP-1620. To access this page, click the
Settings
drop-down menu at the
top of the page, then select
Network
. Click
Save
at any time to save the changes you have made on this page.
Management Link
You can change the URL name of the device by editing the text in
the text box. If you change the name of the device, you will need
to enter “http://xxxx.local.” (where “xxxx” corresponds to the name
of the device) in the address bar of your web browser in order to
access the configuration utility.
The Advanced Settings section of the Network Settings page allows you to
configure both IPv4 and IPv6 settings that will be used by the DAP-1620’s
extended network.
My LAN
Connection is
IP Address
Subnet Mask
Gateway Address
Primary DNS
Server
Secondary DNS
Server
Here you can select whether you want the IP to have a
Dynamic
IP
or
Static IP
address. If you select Dynamic IP, the options below
will not be available.
Enter the Static IP address that you want to assign to the extended
network AP. This address should be outside of the uplink router’s
DHCP address pool.
Enter the subnet mask.
Enter the gateway address. This is usually the IP address of the
uplink router.
Enter the address of the primary DNS server.
Enter the address of the secondary DNS server. This is optional but
will provide backup if the primary server fails.
Advanced Settings
IPv4
