DAP-1620
AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Figure 68. The
Wi-Fi / Super Mesh
page.
To activate the Super Mesh function, on the tab of the relevant band, move the
Enable Super
Mesh
switch to the right. You can specify the following parameters:
Parameter
Description
Domain
An identifier which shows that the device belongs to a certain Mesh
network. This value should be the same for all devices of your Mesh
network.
IPv6
If you need to use IPv6 for configuring the Mesh network, move the
IPv6
switch to the right.
Enable gateway
Move the switch to the right to allow devices of the Mesh network to
use this device for connecting to the Internet.
It is recommended to move the switch to the left when configuring a
subordinate device.
Network name (SSID)
A name of the Mesh network. This value should be the same for all
devices of your Mesh network.
Clients connected to devices of a Mesh network cannot see the Mesh
network and cannot connect to it.
Page
87
of 125
