D-Link DAP-1610 User Manual Download

Page: 56 / 91

DAP-1610

AC1200 Wi-Fi Range Extender

User Manual

Configuring via Web-based Interface

Figure 46. The window for changing parameters of the WMM function.

Parameter

Description

AIFSN

Arbitrary Inter-Frame Space Number

. This parameter influences

time delays for the relevant Access Category. The lower the value,
the higher is the Access Category priority.

CWMin/CWMax

Contention Window Minimum/Contention Window Maximum

. Both

fields influence time delays for the relevant Access Category. The

CWMax

field value should not be lower, than the

CWMin

field

value. The lower the difference between the

CWMax

field value

and the

CWMin

field value, the higher is the Access Category

priority.

TXOP

Transmission Opportunity

. The higher the value, the higher is the

Access Category priority.

ACM

Admission Control Mandatory

If the switch is moved to the right, the device cannot use the
relevant Access Category.

ACK

Acknowledgment

. Answering response requests while transmitting.

Displayed only in the

Access Point

section.

If the switch is moved to the left, the extender answers requests.
If the switch is moved to the right, the extender does not answer
requests.

Click the

SAVE

button.

To disable the WMM function, click the

DISABLE

button.

Page

of 91

Summary of Contents for DAP-1610




























































































Search results

Summary of Contents for DAP-1610

Reviews:

Related manuals for DAP-1610

Brands by name

Popular brands

D-Link DAP-1610, User Manual

Search results

Summary of Contents for DAP-1610

Reviews:

Related manuals for DAP-1610

Brands by name

Popular brands