31
D-Link DAP-1520 User Manual
Section 3 - Configuration
Network Settings
This page lets you configure the network settings for the DAP-1520. To access this page, point to the
Settings
drop-down
menu at the top of the page, then select
Network
. Click
Save
at any time to save the changes you have made on this page.
Device Name:
You can change the URL name of the device by editing the
text in the text box. If you change the name of the device,
you will need to enter
http://xxxx.local./
(where “xxxx”
corresponds to the name of the device) in the address bar of
your web browser in order to access the configuration utility.
Advanced Settings
The
Advanced Settings
section of the
Network Settings
page allows you to configure both
IPv4
and
IPv6
settings that will be
used by the DAP-1520’s extended network.
My LAN
Connection is:
IP Address:
Subnet Mask:
Gateway
Address:
Primary DNS
Server:
Secondary
DNS Server:
Select whether you want the IP to have a
Dynamic.IP
or
Static.IP
address. If you select
Dynamic.IP
, the IP address
information is obtained automatically from your ISP. (The
fields below become irrelevant.)
Enter the Static
IP.Address
that you want to assign to the
extended network AP. This address should be outside of the
uplink router’s DHCP address pool.
Enter the
Subnet.Mask
.
Enter the
Gateway.Address
. (This is usually the IP address
of the uplink router.)
Enter the address of the
Primary.DNS.Server.
Enter the address of the
Secondary.DNS.Server
. This is
optional but will provide backup if the primary server fails.
IPv4 Device Management Interface
