20
D-Link DAP-1520 User Manual
Section 3 - Configuration
The
Wi-Fi Connection Setup Wizard
gives you the option to use
the WPS configuration method. Click
Select.this.option.if.your.
wireless.device.supports.WPS
. Click
Next
to continue.
You will see instructions on the screen that say,
Press the Push
Button (physical or virtual) on the AP
(access point)
.
or Router
... You
have 120 seconds to press the button.
Press and hold the WPS button on your wireless router or access
point until the light starts blinking*. Allow up to two minutes for
the WPS process to complete.
When a connection is successfully made, you will see a notice on
the screen and the LED on the device will turn solid green.
*
Note:
For LED indicator details, refer to the user manual for your
router or access point.
Using the WPS Method
