24
D-Link DAP-1513 User Manual
Section 3 - Configuration
Save to Local
Hard Drive:
Upload from
Local Hard Drive:
Restore to
Factory Default:
Reboot the
Device:
Use this option to save the current MediaBridge®
configuration settings to a file on the hard disk of the
computer you are using. Click the
Save
button. You will
then see a file dialog where you can select a location
and file name for the settings.
Use this option to load previously saved MediaBridge®
configuration settings. Click
Browse
to find a
previously saved configuration file. Then, click the
Upload Settings
button to transfer those settings to
the MediaBridge®.
This option will restore all configuration settings
back to the settings that were in effect at the time
the MediaBridge® was shipped from the factory. Any
settings that have not been saved will be lost, including
any rules that you have created. If you want to save the
current MediaBridge® configuration settings, use the
Save
button above.
Note:
Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Configured.
Click to reboot the DAP-1513.
System
Summary of Contents for DAP-1513
Page 1: ......
Page 30: ...30 D Link DAP 1513 User Manual Section 3 Configuration Help ...
