37
D-Link DAP-1365 User Manual
Section 3 - Configuration
Network Settings
This page lets you configure the network settings for the DAP-1365. To access this page, click the
Settings
drop-down menu at the
top of the page, then select
Network
. Click
Save
at any time to save the changes you have made on this page.
Management
Link:
You can change the URL name of the device by editing the
text in the text box. If you change the name of the device,
you will need to enter “http://xxxx.local./” (where “xxxx”
corresponds to the name of the device) in the address bar of
your web browser in order to access the configuration utility.
Advanced Settings
The Advanced Settings section of the Network Settings page allows you to configure both IPv4 and IPv6 settings that will be used
by the DAP-1365’s extended network.
My LAN
Connection is:
IP Address:
Subnet Mask:
Gateway
Address:
Primary DNS
Server:
Secondary
DNS Server:
Here you can select whether you want the IP to have a
Dynamic IP
or
Static IP
address. If you select Dynamic IP,
the options below will not be available.
Enter the Static IP address that you want to assign to the
extended network AP. This address should be outside of the
uplink router’s DHCP address pool.
Enter the subnet mask.
Enter the gateway address. This is usually the IP address of
the uplink router.
Enter the address of the primary DNS server.
Enter the address of the secondary DNS server. This is
optional but will provide backup if the primary server fails.
IPv4 Device Management Interface