D-Link D-View 5.1, User Manual

Page: 135 / 279

D-View 5.1 User’s Guide
129
IcmpOutMsgs is a read-only MIB object of the icmp group that displays the number of
ICMP messages the device attempted to send. This count also considers those counted
by the
icmpOutErrors counter.
IcmpOutErrors is a read-only MIB object of the icmp group that displays the number
of ICMP messages the device failed to send due to problems discovered within ICMP
(such as lack of buffers). This count does not include errors discovered outside the
ICMP layer such as inability of IP to route the resulting datagram.
IcmpOutDestUnreachs is a read-only MIB object of the icmp group that displays the
number of ICMP Destination Unreachable messages sent by the device.
IcmpOutTimeExcds is a read-only MIB object of the icmp group that displays the
number of ICMP Time Exceeded messages sent by the device.
IcmpOutParmProbs is a read-only MIB object of the icmp group that displays the
number of ICMP Parameter Problem messages sent by the device.
IcmpOutSrcQuenchs is a read-only MIB object of the icmp group that displays the
number of ICMP Source Quench messages sent by the device.
IcmpOutRedirects is a read-only MIB object of the icmp group that displays the
number of ICMP Redirect messages sent by the device. For a host, this object will
always be zero since hosts do not send redirects.
IcmpOutEchos is a read-only MIB object of the icmp group that displays the number
of ICMP Echo (request) messages sent by the device.
IcmpOutEchoReps is a read-only MIB object of the icmp group that displays the
number of ICMP Echo Reply messages sent by the device.
IcmpOutTimestamps is a read-only MIB object of the icmp group that displays the
number of ICMP Timestamp (request) messages sent by the device.
IcmpOutTimestampReps is a read-only MIB object of the icmp group that displays the
number of ICMP Timestamp Reply messages sent by the device.
IcmpOutAddrMasks is a read-only MIB object of the icmp group that displays the
number of ICMP Address Mask Request messages sent by the device.
IcmpOutAddrMaskReps is a read-only MIB object of the icmp group that displays the
number of ICMP Address Mask Reply messages sent by the device.
UDP Counters
This command displays the values of the device UDP counters. When you choose this
command, the MIB-II UDP Counters table appears on the screen:
The following describes the various components on the above table: