D-Link AirPro DWL-AB650, User Manual

Page: 39 / 100

DWL-AB650 Wireless Multimode Cardbus Adapter
39
On the
Configuration Tab click on Refresh to call up all the available
WLANs. On the right side of the screen is a list of Preferred WLANs. These
are WLANs that have already been added to the wireless network. Click
New to rename the WLAN and reset its properties. You will see the
Wireless Network Properties screen as displayed previously when you
click New . This is also the same screen that will appear when you click
Properties on the right side of the Configuration Tab screen. Click
Remove to remove the connection.
On the right side of the screen you may click
Move Up to move the selected
WLAN up in the order it is displayed on the Preferred WLANs screen. You
may click Move Down to move the selected WLAN down in the order in
which it is displayed.
The
Advance button allows the user to set the WLAN type to connect:
infrastructure and ad hoc network, infrastructure network only, or ad hoc
network only. You may also automatically connect to non-preferred networks
by checking the option.
Note : T
he following countries cannot use the ad hoc network: Austria,
Belgium, Denmark, Finland, France, Germany, Ireland, Italy, the
Netherlands, Norway, Poland, Sweden, Switzerland, and the United
Kingdom
.
When you are done entering the settings and options for the wireless
network click on
OK , Cancel , or Apply . OK places the settings into effect
and closes the graphical user interface (GUI). Cancel makes invalid all
settings entered. Apply places the settings entered into effect but does not
close the GUI.
Under the Status Tab you will find information on the connection state,
hardware information, and advanced state.