802.11 a/b/g Access Point Command Line Interface Manual
7
3
U
TILITY
C
OMMANDS
Help Command:
Function
Syntax
help
Display CLI Command List
help or ?
Ping Command:
Function
Syntax
ping Ping
ping
<xxx.xxx.xxx.xxx>
Restart and Exit Commands:
Function
Syntax
set factorydefault
Restore to Default Factory Settings
set factorydefault
reboot
Reboot Access Point. It is necessary to reboot the AP after making
configuration changes for those changes to take effect.
reboot
quit Logoff
quit
Version Display Command:
Function
Syntax
version
Displays the currently loaded firmware version
version
System Status Command:
Function
Syntax
get bdtempmode
Display Monitor Board Temperature Mode
get bdtempmode
set bdtempmode
Set Monitor Board Temperature Mode (In Centigrade)
set bdtempmode [enable:disable]
get bdalarmtemp
Display Monitor Board Temperature Alarm Limitation (In Centigrade)
get bdalarmtemp
set bdalarmtemp
Set Monitor Board Temperature Alarm Limitation (In Centigrade)
set bdalarmtemp <temperature>
get bdcurrenttemp
Display Current Board Temperature (In Centigrade)
get bdcurrenttemp
set detectlightmode
Set HW Detect Light Mode
set detectlightmode [enable:disable]
Addminstration Command:
Function
Syntax
get login
Display Login User Name
get login
get uptime
Display UpTime
get uptime
set login
Modify Login User Name
set login <username>
set password
Modify Password
set password
get wlanManage
Display manage AP with WLAN Mode
get wlanManage
set wlanmanage
Set manage AP with WLAN Mode
set wlanmanage [enable:disable]
get systemname
Display Access Point System Name
get systemname
set systemname
Specify Access Point System Name
set systemname <name>
Other Command:
Function
Syntax
radar!
Simulate radar detection on current channel
radar!
