9
• SSID:
The Service Set Identifier is the name assigned to the wireless network. The
factory SSID setting is set to
default
. Make changes here to match the SSID on
existing Wireless Router or Access Point.
• Wireless Mode:
The factory setting is set to
Infrastructure
. Ad-Hoc mode is used
for peer-to-peer networking.
• Data Encryption:
The default setting is set to
Disabled
. The adapter supports WEP
and WPA when encryption is enabled.
• Authentication:
Allows you to specify the authentication mode for the network. The
default setting is set to
Open Authentication
.
•
Key Length
: When encryption is enabled, you will have the option to specify the
level and key format of the encryption used. Select the appropriate Key Index: 1-4
and enter ASCII or hexadecimal digits in the appropriate field.
• IEEE 802.1x:
When encryption is enabled, you will have the option to specify if you
wish to use 802.1x authentication.
Appendix B - Using the AirPlus Xtreme
G
™
Utility (continued)
