Operation Modes with the DWL-900AP
(continued)
2.
Wireless Bridge Point to Multipoint:
The wireless bridge is
configured to communicate with any wireless bridge available on the
same channel and using the same ESS ID.
Wireless Bridge Point-to-Multipoint mode
Access Point Client Mode
The access point can also act as a client on a wireless LAN. When
configured as a client the access point functions in the capacity of a wireless
end station only. Communication through the wireless interface of the device
can only be accomplished using another Access Point functioning in AP
mode. When configured as a client, the access point connects to a single
computer or an Ethernet LAN via the Ethernet interface. An access point
configured to be a wireless client connected to a single computer is
illustrated in the figure below.
Wireless Access Point used as a Client
DWL-900AP
