24
3. Turn on the power of the DWL-810 by connecting one end of the
power adapter (included with your purchase) into the power port on
the DWL-810, and connecting the other end into the AC power outlet
on your wall.
4. The DWL-810 will automatically detect the MAC address of the
network device to which it is connected, and begin wireless
transmission to other wireless-enabled devices.
8. Troubleshooting
This section provides solutions to situations that can occur during the
installation and operation of the DWL-810 Wireless Client. Read the
following descriptions if you are having problems.
1. The DWL-810 Wireless Client Power light is not on.
•
Check to see if the DWL-810 Wireless Client’s power adapter is
connected properly to a known good power outlet.
2. The DWL-810 Wireless Client Link light is not on.
•
Make sure that the Ethernet cable is connected properly and your
Ethernet adapter supports 10BaseT.
Advanced Setup (optional)
For advanced setup features, enter
http://192.168.0.30
into your
Internet browser and gain access to the web configuration of the
DWL-810. The advanced setup features can be used to change the
LAN and wireless settings for your DWL-810 Wireless Client.
3. I cannot connect to another wireless client.
•
The DWL-810 Wireless Client has a default SSID of
default
.
Make sure that the SSID on the DWL-810 Wireless Client is
exactly the same as the SSID on the other wireless client.
•
The DWL-810 Wireless client has a default channel of
6
. Make
sure that the channel on the DWL-810 Wireless client is exactly
the same as the channel on the other wireless client.
