background image

18

Troubleshooting

Q1: I cannot connect to the DI-614+.

A:

 Make sure that the SSID and the Encryption key (if any) on the DWL-650+ Cardbus

Adapter is exactly the same as the SSID and the Encryption key (if any) on the DI-
614+. (Please refer to the manuals on the included CD-ROM for more information on
enabling Encryption and assigning SSIDs.)

Q2:

 

The DWL-650+ Power and Link lights are not on.

A:

 Check to see if the DWL-650+ Cardbus Adapter is firmly inserted in the Cardbus slot

of your laptop computer.

Q3: I am unable to access the Internet using the DWL-650+.

A1:

 Check that the LED indicators for the broadband modem are indicating normal

activity. If not, there may be a problem with the broadband connection.

A2: 

Check that the LED indicators on the DI-614+ are functioning properly. If not, check

that the AC power and Ethernet cables are firmly connected.

A3:

 Check that the IP address, subnet mask, gateway, and DNS settings are correctly

entered for the DWL-650+ in that specific wireless network.

Q4: I forgot my Encryption key.

A:

 Reset the DI-614+ to its factory default settings and restore the DWL-650+ Wireless

Cardbus Adapter to the factory default settings.

Summary of Contents for AirPlus DWL-650+





















Reviews: