manualshive.com logo in svg

D-Link Air DWL-120, User Manual

Share
Download
D-Link Air DWL-120 User Manual Download Page 53

NETWORKING BASICS

Sharing Printers 

G. You may now share any installed printers connected to 

this computer with other computers on your network. 

From the “Start,” select “Settings,” then select "Printers." 
Right click on the printer that you want to share with others on

the network, and select "Sharing."

H. Click "Share As:" and provide a "Share Name:" to identify

the printer to other computers on the network.  "Comment:" 
and "Password:" are optional.  Then click "OK."
For a computer to access a Network Printer, the device driver
or software for that printer must be installed and pointed to the
proper location of the printer.  This is done much the same way
you installed the printer on the computer it is connected to. 

I. Go to a computer that does not have the printer connected

to it.  From the "Start" button on the Task Bar select "Settings" 
and then "Printers."

J. Double click the "Add Printer" icon. 
K. The "Add Printer Wizard" will appear.  Click "Next."

49

Summary of Contents for Air DWL-120

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands