manualshive.com logo in svg

D-Link Air DWL-120, User Manual

Share
Download
D-Link Air DWL-120 User Manual Download Page 10

GETTING STARTED

Please note that this type of installation requires that your ISP 

or Network Administrator can give you a static IP address for 

each computer.  Please consult the documentation that comes 

with your Access Point to determine its necessary configuration.

To complete this installation, please follow these steps:

1.Using the provided Ethernet cable, connect the router to the

Cable/DSLmodem.  Also connect the Access Point to the Router.

2. Install the wireless Adapter - see the Quick Install Guides.

3. Check the wireless connection- see Configuration Utility and

Networking Basics section.

4. Set Static IP Address for the wireless Adapter - see Networking

Basics section.

NOTE:

If you are using a PPPoE client, go to “Networking Basics

section” instead.  Verify the settings with your ISP or Network

Administrator if necessary.

5. Learn to share printers and files - see Networking Basics.

6

Summary of Contents for Air DWL-120

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands