76
D-Link DIR-869 User Manual
Section 4 - Configuration - Router Mode
Virtual Server
The virtual server allows you to specify a single public port on your router for
redirection to an internal LAN IP Address and Private LAN port. To configure
the virtual server, from the Port Forwarding page click
Virtual Server
. To
return to the main Port Forwarding page, click
Port Forwarding
.
If you wish to remove a rule, click on its trashcan icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the
Add Rules
button. Click
Save
when you are done. If
you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule. Alternatively, select the protocol/Application
from the drop-down menu.
Local IP:
Enter the IP address of the computer on your local network that you
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
Protocol:
Select the protocol of the traffic to allow or deny (
TCP
,
UDP
,
Both
,
or
Other
).
Protocol Number:
If you entered
Other
above, enter the protocol number.
External Port:
Enter the public port you want to open.
Internal Port:
Enter the private port you want to open.
Schedule:
Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to
Always Enable
, or
you can create your own schedules in the
Schedules
section. Refer
to page 83 for more information.
Click
Apply
when you are done.
