7
D-Link DIR-869 User Manual
Section 1 - Product Overview
Hardware Overview
Back Panel
1
Reset Button
To reset the device to its factory default settings, use a paper clip press and hold the reset button for 3 seconds.
2
WPS
Press to start the WPS process and automatically create a secure connection to a WPS client.
3
LAN Ports (1-4)
Connect 10/100/1000 Ethernet devices such as computers, switches, storage (NAS) devices, and game consoles.
4
Internet Port
Using an Ethernet cable, connect your broadband modem to this port.
5 Power Connector
Connector for the supplied power adapter.
6
Power Button
Press the power button to power the DIR-869 on and off.
7
Mode Switch
Select between Router and Extender modes. To change modes, move the switch to the desired position and
after 5 seconds the router will reboot into the desired mode. Router is the default mode.
Note: Extender Mode Access Point functionality available at launch, additional functionality available via firmware
update in Q3 2016.
4
5
6 7
3
2
1
