D-Link AC1200, Quick Installation Manual

Page: 4 / 16

2
DAP-3666 Quick Installation Guide
ENGLISH
# Connector Description
4 LAN1(PoE)
Port
Gigabit RJ-45 port for data and
Power over Ethernet (PoE) power.
Table 2: Interface Description
LAN2
LAN1(PoE)
Figure 3: Rear Connectors
# Connector Description
1 Grounding
Wire
Connector for the grounding wire.
2 Wall/Pole
Mount
Mount to connect to the mounting
plate on a wall or a pole.
Table 3: Interface Description
Installation
Using Power over Ethernet (PoE)
1. Use a standard Ethernet cable to connect
the LAN1(PoE) port on the DAP-3666
to a PoE power source device such as
an 802.3af or 802.3at PoE switch or PoE
injector.
Configuration
Using Nuclias Connect
The DAP-3666 is designed to be managed
through Nuclias Connect. Refer to the
Nuclias
Connect Manual
for detailed configuration
instructions.
Note:
D-Link recommends manually configuring
the device before mounting it.
Nuclias Connect App Configuration
1. Download the free Nuclias Connect app
from the App Store or Google Play by
searching for
Nuclias Connect
or by
scanning the QR code below.
2. Open the Nuclias Connect app and follow
the onscreen instructions to discover and
set up your device.
Manual Configuration
Note:
The management computer, DHCP server
and DAP-3666 must be in the same subnet.
Use one of the following methods to access the
web user interface:
Connecting through Ethernet
1. Use an Ethernet cable to connect the
DAP-3666 to the management computer,
or to the switch or router the management
computer is connected to.
2 1