D-Link 48-Port 10/100Mbps Web-Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP... User Manual Download Page 36

Page: 36 / 100

Tool Menu

The Tool Menu offers global function controls such as Reset,
Configuring Backup and Restoration, Firmware Backup and Upload,
and System Reboot.

Figure 17 – Tool Menu

Reset:

Provides a safe reset option for the Switch. All configurations

will be reset to default.

Figure 18 – Tool Menu > Reset

Configure Backup and Restore:

Allows the current configuration

settings to be saved to a file (not including the password), and if
necessary, to be restored from a backup.

Figure 19 – Tool Menu > Configure Backup and Restore

Summary of Contents for 48-Port 10/100Mbps Web-Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP...





































































































Search results

Summary of Contents for 48-Port 10/100Mbps Web-Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP...

Reviews:

Related manuals for 48-Port 10/100Mbps Web-Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP...

Brands by name

Popular brands

D-Link 48-Port 10/100Mbps Web-Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP..., User Manual

Search results

Summary of Contents for 48-Port 10/100Mbps Web-Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP...

Reviews:

Related manuals for 48-Port 10/100Mbps Web-Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP...

Brands by name

Popular brands