manualshive.com logo in svg

D+H CPS-M1, Original Instructions Manual, Page: 29 / 36

Share
Download
D+H CPS-M1 Original Instructions Manual Download Page 29

29/36

CPS-M1

English

99.827.31 1.4/06/18

Standard configurations

AM:

TMA:

Controller Module (CM)

The isolated outputs from Controller Module 

are pre-configured by all standard control 

panels. The terminal X1 is for general fault and 

the terminal X2 for general alarm signals.

The digital inputs X6.2 and X6.3 are pre-con

-

figured for general open- and general close- 

signals. 

Actuator modules and trigger mo-

dules (AM / TMA)

Screenshots from SCS-Tool for the standard 

pre-configurated actuator modules and trigger 

modules.

Standard classification CPS-M1-XXX-XXXX

Trigger Module / Trigger Line >> Actuator Module / Actuator Group

All ventilation button inputs are pre-configured with the same module actuator group with the same color.

31.700.10

CPS-M1-020-0202

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1, 

Trigger Module 1 Trigger Line2 >> Actuator Module 1 Actuator Group 2

31.700.15

CPS-M1-020-0204

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1+2, 

Trigger Module 1 Trigger Line2 >> Actuator Module 2 Actuator Group 1+2

31.700.20

CPS-M1-020-0404

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1, 

Trigger Module 1 Trigger Line2 >> Actuator Module 1 Actuator Group 2,

Trigger Module 2 Trigger Line1 >> Actuator Module 2 Actuator Group 1, 

Trigger Module 2 Trigger Line2 >> Actuator Module 2 Actuator Group 2

31.700.25

CPS-M1-020-0606

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1, 

Trigger Module 1 Trigger Line2 >> Actuator Module 1 Actuator Group 2,

Trigger Module 2 Trigger Line1 >> Actuator Module 2 Actuator Group 1, 

Trigger Module 2 Trigger Line2 >> Actuator Module 2 Actuator Group 2,

Trigger Module 3 Trigger Line1 >> Actuator Module 3 Actuator Group 1, 

Trigger Module 3 Trigger Line2 >> Actuator Module 3 Actuator Group 2

31.700.30

CPS-M1-040-0204

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1+2, 

Trigger Module 1 Trigger Line2 >> Actuator Module 1 Actuator Group 1+2

31.700.35

CPS-M1-040-0206

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1+2, 

Trigger Module 1 Trigger Line2 >> Actuator Module 2 Actuator Group 1,

Trigger Module 2 Trigger Line1 >> Actuator Module 2 Actuator Group 2, 

Trigger Module 2 Trigger Line2 >> Actuator Module 3 Actuator Group 1+2

31.700.40

CPS-M1-040-0404

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1, 

Trigger Module 1 Trigger Line2 >> Actuator Module 1 Actuator Group 2,

Trigger Module 2 Trigger Line1 >> Actuator Module 2 Actuator Group 1, 

Trigger Module 2 Trigger Line2 >> Actuator Module 2 Actuator Group 2

31.700.45

CPS-M1-040-0406

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1+2, 

Trigger Module 1 Trigger Line2 >> Actuator Module 2 Actuator Group 1+2,

Trigger Module 2 Trigger Line1 >> Actuator Module 3 Actuator Group 1, 

Trigger Module 2 Trigger Line2 >> Actuator Module 3 Actuator Group 2

31.700.50

CPS-M1-040-0606

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1, 

Trigger Module 1 Trigger Line2 >> Actuator Module 1 Actuator Group 2,

Trigger Module 2 Trigger Line1 >> Actuator Module 2 Actuator Group 1, 

Trigger Module 2 Trigger Line2 >> Actuator Module 2 Actuator Group 2,

Trigger Module 3 Trigger Line1 >> Actuator Module 3 Actuator Group 1, 

Trigger Module 3 Trigger Line2 >> Actuator Module 3 Actuator Group 2

31.700.55

CPS-M1-060-0206

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1+2, 

Trigger Module 1 Trigger Line1 >> Actuator Module 2 Actuator Group 1,

Trigger Module 1 Trigger Line2 >> Actuator Module 2 Actuator Group 2, 

Trigger Module 1 Trigger Line2 >> Actuator Module 3 Actuator Group 1+2

31.700.60

CPS-M1-060-0208

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1+2, 

Trigger Module 1 Trigger Line1 >> Actuator Module 2 Actuator Group 1+2,

Trigger Module 1 Trigger Line2 >> Actuator Module 3 Actuator Group 1+2, 

Trigger Module 1 Trigger Line2 >> Actuator Module 4 Actuator Group 1+2

31.700.65

CPS-M1-060-0210

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1+2, 

Trigger Module 1 Trigger Line1 >> Actuator Module 2 Actuator Group 1+2,

Trigger Module 1 Trigger Line1 >> Actuator Module 3 Actuator Group 1, 

Trigger Module 1 Trigger Line2 >> Actuator Module 3 Actuator Group 2,

Trigger Module 1 Trigger Line2 >> Actuator Module 4 Actuator Group 1+2, 

Trigger Module 1 Trigger Line2 >> Actuator Module 5 Actuator Group 1+2

31.700.70

CPS-M1-060-0406

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1+2, 

Trigger Module 1 Trigger Line2 >> Actuator Module 2 Actuator Group 1+2,

Trigger Module 2 Trigger Line1 >> Actuator Module 3 Actuator Group 1, 

Trigger Module 2 Trigger Line2 >> Actuator Module 3 Actuator Group 2

31.700.75

CPS-M1-060-0408

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1+2, 

Trigger Module 1 Trigger Line2 >> Actuator Module 2 Actuator Group 1+2,

Trigger Module 2 Trigger Line1 >> Actuator Module 3 Actuator Group 1+2, 

Trigger Module 2 Trigger Line2 >> Actuator Module 4 Actuator Group 1+2

31.700.80

CPS-M1-060-0410

Trigger Module 1 Trigger Line1 >> Actuator Module 1 Actuator Group 1+2, 

Trigger Module 1 Trigger Line1 >> Actuator Module 2 Actuator Group 1,

Trigger Module 1 Trigger Line2 >> Actuator Module 2 Actuator Group 2, 

Trigger Module 1 Trigger Line2 >> Actuator Module 3 Actuator Group 1+2,

Trigger Module 2 Trigger Line1 >> Actuator Module 4 Actuator Group 1+2, 

Trigger Module 2 Trigger Line2 >> Actuator Module 5 Actuator Group 1+2

Summary of Contents for CPS-M1





































Reviews:

No comments