background image

 

TITLE 

MAINTENANCE GUIDE 

PAGE 

PRINTERS 

PAPYRUS G5/H4, PAPYRUS G5/H6 

VERSION 

2017JAN23/1 

OUT OF 

REVISED BY 

MUNOZ, ANTONIO 

[email protected] 

 

FOR THE USER 

d·gen International, Inc. - COMPANY PRIVATE (LEVEL 1) 

NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS 

DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN

 

 

DISPOSING OF WASTE INK. 

Note 

Since the waste ink bottle does not have a warning system to warn the user that the bottle reached the 
limit, we strongly suggest to keep an eye on the bottle every time the heads are purged 

Note 

 

Never remove the waste ink bottle while the head is being cleaned or a head cleaning operation is in 
progress. Failure to observe this precaution could cause ink to leak. 

 

Have a piece of cloth ready to be placed under the funnel to avoid ink drops hit the bottle holder and 
the floor. 

 

Hold the waste ink bottle from them top. Then tilt a little bit until is possible to remove it from the bottle 
holder. 

 

Pour the ink into a proper waste ink disposal container. 

 

Place the waste ink bottle carefully back again under the funnel. 

 

Double check the waste ink bottle is under the funnel to avoid having ink all over the floor. 

Caution 

Store waste ink a location out of reach of children. 

Caution 

Wear protective eyewear and gloves when replacing waste ink bottle. 

Caution 

If waste ink contacts your skin or enter your eyes or mouth, immediately take the following actions: 
 

 

If fluid adheres to your skin, immediately wash it off using large volumes of soapy water. Consult a 
physician if the skin appears irritated or is discolored. 

 

If fluid enters your eyes, rinse immediately with water. Failure to observe this precaution could result 
in bloodshot eyes or mild inflammation. If problems persist, consult with a physician. 

 

If fluid enters your mouth, consult with a physician as soon as possible. 

 

If swallowed, do not induce vomiting. Consult with a physician as soon as possible. If vomiting is 
induced, vomited material may enter the windpipe, which is dangerous. 

Important 

The waste ink from the printer is an industrial waste. Proper waste ink disposal in compliance with the 
industrial waste disposal laws and ordinances of your local government is required. Consign disposal of 
waste inks to an industrial waste disposer. 

 

 

 

Summary of Contents for Papyrus G5










Reviews: