d.gen Papyrus G5, Maintenance Manual

Page: 2 / 9

TITLE MAINTENANCE GUIDE PAGE
PRINTERS PAPYRUS G5/H4, PAPYRUS G5/H6 2
VERSION 2017JAN23/1 OUT OF
REVISED BY MUNOZ, ANTONIO support@dgen.com 9
FOR THE USER
d·gen International, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
We encourage our users to follow these maintenance procedures to reduce the number of breakdowns, print
with excellent results during a long period and increase its lifespan.
Components to be cleaned or checked
Frequency Component
Everyday
Waste ink drain bottle (when starting the day)
Flushing stage
Front roller
Printing table and media guides
Front and rear dancing bar
Capping unit and its surroundings
Wipers (when finishing the day)
Once a week
Head base plate
Machine’s exterior
Check the PALL ink filter’s level of ink
Once a month
Machine’s interior
Encoder strip
Limit sensors
Capping unit (deep cleaning)
Every six months or less Vacuum filter replacement
Note
Bear in mind, that the following maintenance periods are basically suggestions. It mostly depends on how
much the unit is used and the type of fabrics handled. If the unit is strongly used (24 hours run for example),
or fabrics with heavy coatings, we would recommend the user to shorten the suggested maintenance
periods.
Components to be replaced
Component Part number Frequency
Wiper C90010019-00 Every 6 months / worn out
Flushing stage’s sponge NO PART NUMBER Every 6 months / worn out
PALL Ink filter
D32060004-00 Every 6 months / changing ink chemistry or color
Air filter
D70010032-00
Every 6 months /
if color turned to black (exhausted filter)
Limit sensor
D32040002-00 When damaged / impossible to clean