![background image](http://html1.mh-extra.com/html/d-cut/silverise-series/silverise-series_operation-manual_3075336006.webp)
6
Fill Water
Open the “Open/
cover” then pour water into
the tray. Water can be
added or refilled as
needed during saw
operation
.
Close
Supporting Bar
Extend out fully the
supporting bar before
moving the table. As
shown in Fig.6
Fig.4
Water Level Limit
The plug for the water tray
shown in Fig.5 is also a
water level control device.
Over filling the water will be
drained from the opening
at the top of the plug to
protect the motor.
Fig.5
Fig.6