FOR YOUR SAFETY
This saw can be operated safely only when the operating instructions
have been completely read and strictly adhered to. It is
recommended to receive practical instruction before using the saw
for the first time.
Always inspect cable and plug before using the saw. The outlet
must be grounded. Have damage repaired only by a qualified
professional.
Do not use the saw in standing water or expose rain.
Wear hearing protection and safety goggles.
z
Always remove the plug from the power supply socket before removing saw
from work area, when interrupting work and when not using the saw.
z
Insert the plug into the power socket only when the saw is switched off.
z
Always place the cable away from the saw towards the outside of the saw
table.
z
Do not carry the saw by the cable.
z
Wear sturdy footwear.
z
Do not use the saw when the blade is not installed properly.
z
Always switch off the saw before lifting the table for cleaning.
z
Only use original
D-Cut
accessories.
z
Never leave the saw running unattended.
z
Keep guards in place. Adhere to safety guidelines: (ANSI) American Safety
Standards Institute.
z
Never stand or lean on equipment. Serious injury could occur if the machine
is tipped or is unintentionally contacted.
z
Do not over reach. Keep footing and balance at all times.
z
Disconnect tools. Before servicing, and when changing accessories such as
blades or profile tools. Turn off equipment!
z
Use the correct tools. Do not force the equipment or accessory to do a job
for which it was not designed
z
Use proper extension cord. Improper cord length and/or gauge is the
leading cause of premature electric motor failure! When in doubt use
heavier gauge cord.
z
An extra space needs to be remained around the machine as the working
table moves over the machine edge.
2
