3
Free Angle Cut
Remove the stopper attachment from
the cutting table. Place the material on
the table as shown, follow the line that
you draw on the material, then push
the handle down to complete the cut.
Warning:
Avoid contact with the steel teeth along
the cutting slot, which may cause
injury.
Square Cut
Insert the material between the cutting
blade and the stopper, flush with the
stopper attachment as shown and hold the
material then push handle down to
complete the cut.
Warning:
Avoid contact with the steel teeth along
the cutting slot, which may cause injury.
Lengthwise Cut
Find two holes on the table that meet
your requirement of the width you
want to cut, insert the stopper
attachment into the holes. Place the
material on the table flush against the
stopper attachment as shown, then
push the handle down to complete the
cut.
Warning:
Avoid contact with the steel teeth along
the cutting slot, which may cause
injury.
