3
CUTTING AND C
Assembly
Assemble the table and handle
to the cutter base with
provided screws and bolts as
shown.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
45° Cut
Adjust the angle attachment
to 45°. Insert material
between the cutting blade
and the base, against the
angle attachment as shown,
then push the handle down
to complete a cut.
Warning:
Maintain control
of the handle. Do not allow
handle to slam back after
making a cut.
Straight Cut
Insert material between the
cutting blade and the base,
flush it with the guide bar as
shown and hold the material
then push handle down to
complete a cut.
Warning:
Maintain control of
the handle. Do not allow
handle to slam back after
making a cut.
