D-Boss LT-40FEP, Owner'S Manual

Page: 17 / 32

ENGLISH
17
Other functions
TV, SCART1, SCART2 and S-VIDEO modes
(You can’t set PC mode in this menu. Use the TV/AV
button)
External equipment inputs:S-VIDEO mode are used for
video devices like VCRs, DVDs, etc.), SCARTmode is used
for SCART type devices.
Note : If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENU button.
2. Select the Special menu.
3. Press the PR
x xy y
button to select Input .
4. Press the VOL
Ï Ïq q
button to select TV, SCART1,
SCART2 and S-VIDEO.
SCART1 : AV device connected to the SCART1 jack.
SCART2 : AV device connected to the TV's SCART2 jack.
S-VIDEO : S-VIDEO device connected to the TV's S-
VIDEO Input.
To return to TV mode, press the TV/AV button.
Alternatively you can select the TV, SCART1, SCART2, S-
VIDEO, PC-ANALOG or PC-DIGITAL mode by pressing
the
TV/AV button.
Auto sleep
If you select Auto sleep on the set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Press the MENU button, select the Special menu.
2. Press the PR
x xy y
button to select Auto sleep .
3. Press the VOL
Ï Ïq q
button to select On .
4. Press the TV/AV button to return to normal TV
viewing.
Blue back
Programme without a program signal appear in blue.
Auto wide (Aspect Ratio Control)
Press the ARC button to select a desired picture format.
Each press of the ARC button, selects Auto Wide, 16:9,
14:9, ZOOM, 1:1 and Auto wide mode.
▲▼ ◀▶ MENU TV/AV
Special
Input TV
Auto sleep Off
Blue back On
Auto wide Off