To facilitate the insertion of the connecting
links in the corresponding slot of the top box, each
angle has an associated pin hole which is labeled and
located on each side of the box. Highly resistant 6mm
quick release pins with a ball safety lock are used set
the angles.
B) AXC-V25
The
is made from stainless steel
and has been specially designed to ceiling mount up
to 4 VARIANT 25A units. This ceiling mount accessory
also allows for hook clamps to be fixed to it, so up to 4
boxes can be attached to truss structures. The
VARIANT 25A units must be fixed to the ceiling mount
accessory by means of 4 M8x35 DIN912 screws.
AXC-V25
Manual del usuario/
User´s manual
26
0º
1º
2º
4º
5º
10º
9º
7º
8º
6º
3º
0º
1º
2º
4º
5º
10º
9º
7º
8º
6º
3º
In order to fly the units, the connecting link
must be rotated until the desired splay angle is
reached
(1). Then the quick release pin must be
introduced into the pin hole labeled with the desired
splay angle (2). The box will be flown from the rotating
point located in the top box as shown in the figure (3),
and finally the lower box will be secured by
introducing one more quick release pin in the top box
(4).
first
Variant series
4
1
2
3
Most of the accessories needed to fly or
stack the units are integral to the enclosures. The only
additional items needed are the rigging bumpers.
A) AX-V25
The AX-V25 rigging grid (bumper) is made
from steel beams and is designed to handle great
loads. It features a center reinforcement bar that is
also used for the lifting slings. One chain can be used
to determine the tilt angle of the whole cluster,
depending on the hole used to attach the chain to the
center bar. The first box in the array will be attached to
the AX-25 by means of the above described
connecting links and quick release safety pins. Both
the VARIANT 25A and VARIANT 18A can be attached
to the AX-V25 bumper. Up to 20 VARIANT 25A units
can be flown from the AX-V25 bumper while
maintaining a 7:1 safety ratio.
Weight
Dimensions: 29 x 58.5 x 16.9 cm
(H x W x D) 11.4
: 2.6 kg (5.7 lb)
x 23 x 6.6 in
Weight
Dimensions: 5 x 57.4 x 39 cm
(H x W x D) 2
: 5 kg (11 lb)
x 22.6 x 15.4 in
