Manual del usuario/
User´s manual
39
Variant series
The AXC-V25 accessory can also be used as
a support for up to two VARIANT 25A units on a pole
mount accessory, on top of one VARIANT 18A unit. To
do so the AXC-V25 accessory is to be used upside-
down and a special pole mount adaptor must be fixed
to it by means of two M8x35 DIN912 screws, nuts
and washers. A 10º splay angle is recommended in
order to achieve a 20º vertical coverage.
When a pair of hook clamps are attached to
the ceiling mount accessory, it can be fixed to a truss
structure such as the one shown in the picture below:
Adaptor
M8x35 DIN912
AXC-V25
Pole Mount
20º
