25
Manual del Usuario /
event series
/
User’s Manual
Array mounting of groups of 4 units on a flatbed dolly
Rise the system and splay angles between
cabient will be set automatically:
0º
1º
4º
Repeat the process with the second dolly.
Lower the first four units, set splay angle in the ones
stacked on the dolly, attach the two groups and rise
it. In the sample shown only three pins per cabinet
are used:
set splay angles
lower the 4 units
Fig.10
Fig.11
NOTE: To rig the system the simplest approach is
using three pins (two at the front and one at the
rear). With this method the splay angle between
units is set automatically while the cabinets are
lifted up.
If the user needs to lock the splay angle between
the units, an extra pin (pin number 4), has to be
inserted in the rear structure in hole named
“splay+1º”.
1º --> this is the actual splay angle
Splay+1º will be 2º hole
Raise the 4 units
