7
Manual del Usuario
/ convert
15A
series /
User’s Manual
Remote monitoring is provided by way of the
monitoring system and software, an audio management
application for
powered cabinets and processors.
software offers users instant and intuitive
control over a range of parameters of a single cabinet or
processor via USB, or a network of them via RS485.
The wide frequency range and impressive output of
the
convert 15A
is possible thanks to the D.A.S. built
transducer components. For the high impact, low
frequency reproduction required in a system of this level,
D.A.S. employs the
15GNR
loudspeaker, a 15” device
incorporating a 102 mm (4”) edge-wound voice coil and a
light-weight neodymium magnet assembly
Three
M-60N
neodymium compression drivers are
used to handle high frequency reproduction. The drivers
employ a 44 mm (1.75") voice coil made using copper
clad aluminum flat wire bonded to a urea polyamide
diaphragm. This high performance thermoplastic,
improves sensitivity and acoustic output as well as timbre.
The M-60N units are attached to the new
BPS-320
TM
dSerpis
trifunctional waveguide.
The new generation of Serpis waveguide technology is
exhibited in the extraordinary design of the
. Producing a time-aligned, phase coherent 20º
wave front, the
maximizes the combined
output of the three
M-60N
drivers. When used in tight-
packed horizontal or vertical curved source arrays, the
provides extremely tight pattern control
with minimal interaction between horns.
TM
As a point source, the drivers receive the
DCD
processed signal widening the curvature of the wavefront
to 40º. This permits the
convert 15A
to be used as a single
cabinet or pairs of cabinets delivering the required
coverage to a broader area.
The
convert 15A
enclosure is constructed using birch
plywood and finished with the ISO-flex black paint
providing excellent protection and durability. The 20º
trapezoidal shape of the
convert 15A
enclosure allows for
tightly packed arrays with minimal high frequency
interaction. As an aid when stacking the enclosures in
vertical arrays, rubber locators on the side panels match
with fitting points on the surfaces of adjacent cabinets
preventing slippage.
TM
The optional
InterLox
rigging system can be used to
quickly and safely assemble tight-packed vertical or
horizontal curved-source arrays. M-10 threaded rigging
points are provided for use in permanent installation (for
more information see Rigging Manual).
D.A.S.
BPS-320
TM
dSerpis
TM
BPS-320 dSerpis
TM
BPS-320 dSerpis
20º
40º
convert 1560A
Vertical dispersions according the model
TM
Horizontal dispersions according DCD
convert 1590A
30º
30º
45º
45º
