INTRODUCTION
6
- Lates generation of AD/DA converters.
TM
- Remote monitoring and control via
DASnet
- Newly developed high frequency waveguides.
- Higher SPL and increased power handling.
- New rigging system for improved ease of use and safety.
TM
- Advanced Line Array System (
ALAS
).
- Powered two-way configuration.
- 2400 Wpeak Class D power amplifier.
- Powerfull DSP with Brick wall FIR Filters.
- Full limiting and protection features.
The
AERO-20A
is a 2-way powered line array system which incorporates connectivity for remote
TM
monitoring and control. The unique configuration of the
AERO-20A
Advanced Line Array System (ALAS )
incorporates a 12” transducer in a bass-reflex configuration for low-end and mid range reproduction. High
frequency reproduction relies on one DAS M-75N compression driver attached to a new BPS-1912
waveguide. This product is available in two horizontal coverages: 90º (referred to as
AERO-20A
) and 120º
(referred to as
AERO-20.120A
).
Power for the
AERO-20A
is provided by a package of integrated electronics that includes a new 1200 W
(2400 Wpeak) amplifier, advanced digital signal processing and connectivity for remote system management.
The three channel, high efficiency Class D amplifier design is equipped with a switch mode power supply
(SMPS) and a comprehensive protection package for both the amplifier as well as the components. Channel
one powers the low-mid frequencies with channel two powering the high frequencies.
The
AERO-20A
incorporates the latest in digital signal processors. Brick wall FIR filters have been used to
provide perfect alignment between ways achieving exceptionally uniform coverage, inclusive at the crossover
point. Top-of-the-line AD/DA converters have been employed allowing for significant improvements in
dynamics, lower distortion and ultra-low noise levels.
TM
Remote monitoring and control is provided by way of
DASnet
, the audio management application for
TM
DAS powered cabinets and processors. The
DASnet
software offers users instant and intuitive view of the
system status as well as control over the range of parameters of a single cabinet or a network of them.
The
AERO-20A
enclosure is brilliant in design. Constructed using birch plywood and finished with the ISO-
Flex black paint offers excellent protection and durability. Two individual assemblies comprising the high
frequency waveguide and the carrier of the 12” woofer are made from injection molded aluminum and
attached to the front of the cabinet. A two-piece injected aluminum heat sink housing the amplifier and
related electronics is attached to the rear of the cabinet.
A robust steel grille with a powder coat finish has been used to protect the components. Stainless steel
has been employed to fasteners and parts of the new rigging system. The captive rigging system has been
designed to provide ease-of-use, safe rigging and precise aiming. Using captive links and quick-release pins,
the spring-loaded links remain positioned while rigging and prevent rattling during operation.
Features
AERO-20A
AERO-20.120A
Manual del Usuario
/ aero series /
User’s Manual
